Nissan Supervac for hire
- Nissan Supervac
- Number in Fleet
More Information - Nissan Supervac
This super-Vac is a large powerful unit, getting its vacuum supply for two Taiko rotary blower pumps connected in tandem. The primary pipe work is 8" before going through the scrubbers and centrifuge where it drops down to 6". The suction hose is 4" though could handle bigger for volume. This unit can recover solids; liquids drill mud, max depth < 20m. All of the rotating parts are driven of the one main engine on the truck, through the pto drive. This is controlled from inside the cabin; throttle speed and vacuum loading adjustment are carried out at the command centre kerbside. The scrubbers function is to clean the incoming air prior to entering the pumps, being filtered through water. There is also a heat exchanger misting system installed for the cooling of the pumps. The tank is fully hydraulically operated for tilt and rear door operation, the tank volume is 6,000 Litres. The hydro vac system/ wash down blaster, for hole digging / plant washing/ breaking up drill mud or just cleaning the tank after empting. The vacuum pumps operate at between 1000- 1500 rpm providing suction power of 28 inches of mercury @ 1200 rpm each, Air flow is 52m3 @1100 rpm for the primary pump and 46m3 @1100 rpm. For the secondary unit.
GSR Industrial Solutions has this item available for hire nationwide from :
- HOWARD SPRINGS, NT, 0835
- View Website