Concrete, Steel, Plastic Water-Filled Barrier Systems Hire
- Concrete, Steel, Plastic Water-Filled Barrier Systems
- Number in Fleet
Designed for safety, our concrete barriers offer several advantages to contractors working on roads and highways as well as to the travelling public.
Highly visible public safety measure
Featuring bright orange paintwork (hire barriers only) and F-Shape profile, the concrete barriers provide road users with a highly visible work site safety marker.
Higher site traffic speeds
Australian Standard 1742.3:2002, Section 4.3 permits higher traffic speeds adjacent to work sites protected by NCHRP-350 TL-3 compliant barriers. The use of our barriers reduces disruption to established traffic movement patterns as well as inconvenience to road users.
Temporary or emergency access is available at any point and at any time with the unique connector allowing any individual barrier (or group of barriers) within a run to be quickly lifted out of the way using a forklift, small crane or excavator with a set of lifting chains and standard 2.5-tonne lifting clutches.
Unlike conventional barriers, our concrete barriers do not incorporate loose hardware, moving parts, pins, bolts, brackets, cables, nuts, water or sand ballast for vandals to tamper with.
These safety barriers are designed to prevent loss of structural integrity or security due to lost or missing hardware, also saving the cost of replacing missing hardware.
Quick and easy installation
Our concrete barriers offer one of the lowest installation costs of any TL-3 barrier system, thanks to the self-aligning properties of the hooks and their rebates, the identical ends and the lack of loose hardware. One person and a loader operator can install approximately 1000 metres in an 8-hour shift.
The standard 3.6-metre unit weighs less than 2.5 tonne and can fit in the tray of most small trucks used on roadwork sites. The self aligning nature of the barriers allows excavators or other plant, with a certified lifting point, to install and remove barriers quickly and efficiently even if a crane is not available.
The standard 3.6-metre barrier can be placed on horizontal alignments (left or right) with a minimum radius of 30 metres and on vertical alignments with radii as tight as 30 metres (sag) and 53 metres (crest).
Our barriers can be easily attached to any of the NCHRP compliant crash cushions including the Quadguard, NEAT, ADIEM, React 350 and ABSORB 350. The barriers can be aligned so that the ends are beyond the clear zone and the line of the barriers converges with the traffic alignment at 10:1.
Workplace Health and Safety
Our concrete barriers meet various requirements of the Workplace Health & Safety Act, thanks to their compliance with NCHRP-350 TL-3 and AS/NZS 3845 in addition to the hazard-free design that eliminates the problems of loose or missing hardware, difficult emergency access or faulty installation.
The safety barriers also allow contractors and various road authorities to provide their staff, subcontractors and the traveling public with a safe and healthy workplace in accordance with the requirements of the local Workplace Health & Safety Act.